Hi, I'm Pat and I'm a ...

[brooksman9]

Thanks Matt. Happy Holidays and Merry Christmas to you too. A little cruising but this turned out to be a bad idea

I think I will cut just a bit more off the front springs while I have it all apart.

Wound up having to install new springs in the front after cutting them and it bottoming out too bad. Ride is much better now. Still contmplating doing something else about the rear.

 

[Blu-By-U 79Z]

Merry Christmas to you also! Sucks to hear. But at least you have everything else done. Glad things are coming back together.

 

[brooksman9]

For my reference. Installed Moog 5610 springs in the front. Just finished installing the Mr Gasket shackle kit in the rear. Original shackles were 3 1/4" hole to hole. I used just about the lowest setting on the new ones at 5 3/4" hole to hole. Really only gained right at an inch height at the wheel wells. I think it is right where I want it. Rides good too.

 

[olstyle]

Stance looks great Pat

 

[brooksman9]

Thanks Guy. I'll get some better pics soon.

 

[clay's70]

Pat, that looks great!! I'm glad I'm not the only one
with Fall/Autumn in my garage

 

[Orange71]

I liked the "old" stance and this stance looks pretty good too! The space over the tires looks more even now...nice

 

[Teamchevy]

Nice job Pat! Looking sharp!

Dave

 

[74_Camaro]

Looks great! Do you mind sharing what your front height is at the wheel (ground to fender)? Just like you did for the back!

 

[brooksman9]

Looks great! Do you mind sharing what your front height is at the wheel (ground to fender)? Just like you did for the back!

I'm at 25 3/4" both sides.