Yeah, but just nice to be out driving. I still need to finish my 500 mile break-in on the new engine. 
Jeff
Jeff
Gratuitous wet car shot
- Thread starter biker
- Start date
This site may earn a commission from merchant affiliate links like Ebay, Amazon, and others.
Thanks man! Your carb work is flawless. Cruise AFR is likely a tad on the lean side because I jetted the mains down a bit, but if I go up on them and restrict the power valves a bit more, cruise and full throttle should be perfect.
It's super responsive, I can casually accelerate in highway traffic without downshifting from 5th and still easily pass trucks etc. Dropping down to 4th or 3rd to pass makes a loud screaming noise from the passenger seat.
Certainly the same exterior combo!
This site may earn a commission from merchant affiliate links like Ebay, Amazon, and others.
Well, yours is going to be an absolute beauty when its finished. Getting close now!Yeah, but just nice to be out driving. I still need to finish my 500 mile break-in on the new engine.
Jeff
Thanks, I appreciate that. It hasn't been a journey as long as others on here, but it is very exciting to see that we are at the cusp of it being completed with the exception of a few upgrades in suspension.
Jeff
Zstar
Veteran Member
Just a WAG, but I believe that screaming noise has something to do with the seat spring not liking the compression factor. ...jus sayin. LOL!
f-body freak
Veteran Member
Lmao. 
Those passenger seat screaming noises are quite common. My 2010 Camaro has them, & usually after a couple screams, something will come from over there & hit me in the arm. 
It's the craziest thing
Those passenger seat screaming noises are quite common. My 2010 Camaro has them, & usually after a couple screams, something will come from over there & hit me in the arm. It's the craziest thingThanks! The gauges are made by Speed Hut, and the bezel is made by Keith at Custom Works. I bought everything wired and assembled from him a few years ago. GPS speedo ia nice I have a large blank spot where the vents would be on the right, just paralyzed right now as to what gauges to put in there.
Last edited:
I have the bruises to show for it.Lmao.
