Original set of LT-1 guide plates off old 70 z28

[450bench]

Anybody need a set of original LT-1 guide plates off my old 70 z28?
I think these are last things I’ve got off off that car from years ago.
$50 if anybody wants them.

 

[mikethegoon]

Are the studs laying around?

 

[450bench]

Actually using them on current engine.

 

[mikethegoon]

I think my guy may have drilled holes too deep. And now I'm required to seal the studs as they enter the water jacket

 

[mikethegoon]

Also ,the aluminum covers required the vc gasket to be cut at mounting bolt so they could fit within confines of cast cover sealing rail.

 

[COPO]

I think my guy may have drilled holes too deep. And now I'm required to seal the studs as they enter the water jacket

I read somewhere that the Factory studs do enter the water jackets and is why sealant is required on the threads.

 

[suds788]

I read somewhere that the Factory studs do enter the water jackets and is why sealant is required on the threads.

Agreed - But I think only the exhaust studs do not intakes - might be wrong someone might correct me?

 

[COPO]

Fixed it after reading it 4 times. Added the ,. I was reading do not as don’t.

But I think only the exhaust studs do, not intakes

 

[suds788]

Fixed it after reading it 4 times. Added the ,. I was reading do not as don’t.

But I think only the exhaust studs do, not intakes

My bad! Thanks for the fix COPO!

 

[mikethegoon]

Pm sent on guide plates