Its not for either of the camaros. Its for my 83 F250 IDI diesel truck that I've been building for my college 4 wheel drive vehicle. Im so hyped!!! I knew I could do it, but there was always that thought in the back of my head, "you're going to screw this up, there goes $450." But I did it!! That is not paint on those housings. I had them professionally ceramic coated, inside and out. Unfortunately they screwed up and also coated the turbine housings inside the housings as well, and I had to spend 2 hours carefully cleaning all the ceramic coating off of those surfaces. It spins SOOOOO nicely! ;p I'm struttin' this accomplishment.