Horsepower

Discussion in 'The BS Topic' started by Luv70's, Jul 29, 2007.

  1. Luv70's

    Luv70's Member

    With 400 always being my goal ( unachieved ), how many of you have a 400+ horsepower motor in their ride? I'm not talking about dedicated race cars, I mean daily drivers or at least weekly drivers.
     
  2. 3origZlovers

    3origZlovers Veteran Member Lifetime Gold Member

    1,658
    0
    Dec 25, 2004
    Springfield,MO. USA
    just finished my boy's 355 for his 78Z. 72LT-1 motor out of a vette, bored 30 with goodies, intake and headers. Running in the 410 to 425 range with 3:42 gears and a 24-2800 stall. Awsome!
    [​IMG]
     
  3. KJZ28

    KJZ28 Veteran Member Lifetime Gold Member

    3,139
    1
    Sep 26, 2004
    Brewsterico, New Fail
    Deffinately not as nice as^^^^^^^^but cost very little $

    I know its ugly but this is hovering around the mark...my buddy who helps me with my car said it should have about 400.
    Chevy 400 heads, 4 bolt 350 block, Edelbrock performer aluminum manifold..Holley 700cfm double pumper carb, roller tip rockers, cam specs .570/.580 lift and .312/.320 duration...or somewhere around that, the cam and many of the other parts where free.

    Oh the heads and intake are gasket matched.

    [​IMG]
     
    Last edited: Jul 30, 2007
  4. 1981z28owner

    1981z28owner Veteran Member

    2,562
    0
    Nov 28, 2005
    midwest
    mine should be pushing over 400.

    [​IMG]
     
  5. ZS10

    ZS10 Moderator Staff Member Lifetime Gold Member

    12,165
    2
    Jan 18, 2003
    BC, Canada
    I have a sb 355 mild cam that makes 400 with a little spray, and bb that makes 400hp at 3/4 throttle. :)
     
  6. Redge

    Redge Veteran Member

    4,130
    0
    Oct 11, 2003
    Denton, Texas
    Ha....not me. I'm probably only packing around the 250hp range.
    One day....a 383, but for now I can only wish.
     
  7. muscl car

    muscl car Veteran Member Lifetime Gold Member

    [​IMG]

    425hp ......... it's a 350 built to baldwin motion phase III Z/30 sbc specs , it's basically a 70 LT1 350/360hp with 11.1:1 comp built to motion performance specs using the GM #140 mechanical flat tappet cam listed in my signature
     
    Last edited: Jul 30, 2007
  8. Dstryr

    Dstryr Veteran Member

    945
    0
    May 16, 2007
    Gilroy, CA
    Don't have any pics right now but...
    I've been building a 357

    10.5:1 Compression
    58 cc heads (aluminum) 165 runner 1.90/1.50
    solid lifter cam. somewhere around 503 lift?
    everything has been honed and balanced to within perfect racing specs
    Edelbrock performer rpm manifold
    Holley 750 carb.
    Shorty Headers

    I'm hoping to be pushing around 350hp?
    This car will be my daily driver so Idk...anyone have any guesses?
     
  9. BADBLACKZ

    BADBLACKZ Moderator Staff Member Lifetime Gold Member

    3,136
    0
    Sep 14, 2003
    Bellevue, MI.
    400 H.P. [​IMG]is easy.....................Childs play really.............;)
     
    Last edited: Jul 30, 2007

Share This Page