Hi, I'm Pat and I'm a ...

Discussion in 'Project Progress' started by brooksman9, Aug 9, 2008.

  1. brooksman9

    brooksman9 Veteran Member

    5,820
    63
    Jun 10, 2007
    Olive Branch, MS
    Thanks Matt. Happy Holidays and Merry Christmas to you too. A little cruising but this turned out to be a bad idea

    Wound up having to install new springs in the front after cutting them and it bottoming out too bad. Ride is much better now. Still contmplating doing something else about the rear.
     
  2. Blu-By-U 79Z

    Blu-By-U 79Z Veteran Member Lifetime Gold Member

    5,526
    13
    Feb 11, 2009
    Kentucky
    Merry Christmas to you also! Sucks to hear. But at least you have everything else done. Glad things are coming back together.
     
  3. brooksman9

    brooksman9 Veteran Member

    5,820
    63
    Jun 10, 2007
    Olive Branch, MS
    For my reference. Installed Moog 5610 springs in the front. Just finished installing the Mr Gasket shackle kit in the rear. Original shackles were 3 1/4" hole to hole. I used just about the lowest setting on the new ones at 5 3/4" hole to hole. Really only gained right at an inch height at the wheel wells. I think it is right where I want it. Rides good too.

    [​IMG]
     
  4. olstyle

    olstyle Veteran Member Lifetime Gold Member

    8,648
    0
    Jan 27, 2008
    Crestwood IL.
    Stance looks great Pat :bowtie:
     
  5. brooksman9

    brooksman9 Veteran Member

    5,820
    63
    Jun 10, 2007
    Olive Branch, MS
    Thanks Guy. I'll get some better pics soon.
     
  6. clay's70

    clay's70 Moderator Lifetime Gold Member

    Pat, that looks great!! I'm glad I'm not the only one
    with Fall/Autumn in my garage :rolleyes:
     
  7. Orange71

    Orange71 Veteran Member Lifetime Gold Member

    3,793
    0
    Jan 31, 2001
    Finksburg, MD
    I liked the "old" stance and this stance looks pretty good too! The space over the tires looks more even now...nice :cool:
     
  8. Teamchevy

    Teamchevy Veteran Member Gold Member

    1,629
    0
    Aug 31, 2008
    Peterborough, Ontario
    Nice job Pat! Looking sharp!

    Dave
    :bowtie:
     
  9. 74_Camaro

    74_Camaro Veteran Member

    601
    13
    Feb 14, 2010
    Olathe, KS > Dearborn, MI
    Looks great! Do you mind sharing what your front height is at the wheel (ground to fender)? Just like you did for the back!
     
  10. brooksman9

    brooksman9 Veteran Member

    5,820
    63
    Jun 10, 2007
    Olive Branch, MS
    I'm at 25 3/4" both sides.
     

Share This Page