gonna go ahead and do the rear since im doing the motor

Discussion in 'The Carolinas (North & South)' started by Mwilson, Nov 25, 2017.

  1. Mwilson

    Mwilson Veteran Member

    since im doing the motor I decided to do the rear end, already have eaton posi so I ordered:

    Alloy USA axles
    Moser C-clip elim
    moser wheel studs
    open end wheel studs
    motive 3.90 gear
    Pretty rear end cover lol
     
  2. Dave Nelson

    Dave Nelson Veteran Member Gold Member

    3,133
    373
    Dec 19, 2003
    Vineland N.J USA
    Get the axle tubes welded if haven't done so already.
     
  3. Mwilson

    Mwilson Veteran Member

    I haven't rear is in the car, Can it be done after at a shop with rear end together? I dont think my welder will work wire fed only does up to 5/16 steel
     
  4. Dave Nelson

    Dave Nelson Veteran Member Gold Member

    3,133
    373
    Dec 19, 2003
    Vineland N.J USA
    It should be done with the housing empty with a jig thru it to keep from twisting. The area to be welded needs to heated with a torch before welding. A good shop should know how to do this.
     
  5. Mwilson

    Mwilson Veteran Member

    I hate to say it but I cant stand the wait maybe I'll pick up a new housing and swap my parts in
     
  6. Mwilson

    Mwilson Veteran Member

    side note everything but my crankshaft came in today!! I'm so ready
     

Share This Page