another eddy rpm head big block build

Discussion in 'Engine Topic' started by Jimmac, Feb 25, 2018.

  1. Jimmac

    Jimmac Veteran Member

    242
    29
    Dec 24, 2013
    tucson az
    posted on team chevelle too but always looking for advice.
    just fell into a set of 110 cc rpm intake for ft cam. I have a 454 short block builder. Rpm intake and hedman 1 3/4 headers.
    So what would be a budget friendly build for what I have? northern auto has the master kit for under 600 bucks with flat tops or upgrade to hyper 693 pistons.
    machine work is 790 bucks. not decking or align bore, but resize rods balance etc.
    car is a 66 chevelle weekend driver, m20 4 speed 3.55 posi.
    reusing the 750 vs Holley and hei.
    any cheap opinions of parts, source, cam advice (flat tappet).
    Not a bracket car, the 350 in it now is probably good to go, but I'd like to put the heads to use. jim
     

Share This Page