Body Rotisserie

[Plater Tom]

I am looking for directions/instructions for building my own, rather than buying one. I am rebuilding my 66 Chevy II and would really like to make my life easier for a change.I saw some advertised on Ebay for around $22. anything else available? Plater Tom

[ZS10]

I'm going to put a couple 2x6s perpendicular to the rafters and hang a couple short chains through the ceiling so I can use a couple chain hoists to lift a body up and not be tripping over a stand, or have to find a place to store it when not in use.

[mech393]

if you go to trifive.com look through the message boards i saw drawings and pictures of built ones, there you wont have to pay for diagrams you can download them

[burak sozer]

spinning my tires articles, search the article by matthew harwood . Its very detailed. It was 2,5mb I couldnt post it here...

[c.schulz]

Originally Posted by burak sozer

spinning my tires articles, search the article by matthew harwood . Its very detailed. It was 2,5mb I couldnt post it here...

Cant find!!! Could you post the web site.Or just the link???

Chris

[burak sozer]

http://www.harwoodperformance.bizlan...itorial_20.htm

here is the place hope it helps.

[Plater Tom]

Thanks for the info. Tom

[burak sozer]

No problem, Im planning to built one. If you fabricate it send some pictures.
Good luck.
Burak.

[rustover]

How much do you think it would cost to build the one from the link?

[burak sozer]

Sorry I dont have any idea about steel boxes there, here in Turkey, steel box is cheap, if you buy recycled one is cheaper than the regular price

BTW. you can check the finished one price at eastwood tools , then you can decide if its worth to mess with it since the freight is high to overseas it's woth for me.