Crossmember (ACESHIGH)

[tb8125]

I need more info about using the stock crossmember for a LS1 swap using 4L60E using BRP motor mounts going into a 1980 f-body

[Aceshigh]

I just flipped my TH350 crossmember 180*.

IIRC I borrowed a high carbide drill tip to make NEW holes , and later realized I didn't even need them.
I used the Trans Dapt motor mount plates, and my stock cups because the Trans Dapt cups were too small.

I'm sure after 4 years some better options have come out though.

[tb8125]

thanks