Need Your Input

RICARDO1969 · 03-21-2010, 01:35:46 AM

Ok im getting ready to buy a set of guns to spray some 2k. What do you think of this kit compared to the harbor freight guns?
http://www.northerntool.com/shop/too...0925_200310925
OR?
http://cgi.ebay.com/ebaymotors/New-3...motiveQ5fTools

norwood · 03-21-2010, 08:41:18 AM

The Astro LVLP guns are the best low priced gun on the market.

http://www.spraygunworld.com/products/Astro/index.htm

76 camaro car · 03-21-2010, 09:34:20 AM

I agree,Astro has been around for many years and they make a good long lasting product. I have never used them as a paint gun but have used for primer. I always use a De Villbiss or a Sharpe to paint with.

5spd540 · 03-21-2010, 10:01:17 AM

I spray glue with harbor freight guns

2FAST2z · 03-21-2010, 12:38:42 PM

I just bought the set from TCP Global last week, sprayed primer yesterday and they did great. Shipping time was very fast also

RICARDO1969 · 03-21-2010, 11:26:29 PM

Well i went with this kit i wanted the blue set but that was $300 bucks and this kit was $128 what ya think?
StartingLine Topcoat & Priming Spray System
Includes 2 Full Size HVLP Spray Guns

••1 - Basecoat, Clearcoat and Topcoat Spray Gun
••1 - Sealing and Priming Spray Gun

This 2 Gun System is perfect for the Handyman, Craftsman, Hobbyist and the Do-It-Yourselfer!

It allows you to Spray the Full Spectrum of Coatings
for any size Project Large or Small.
Kit Contains:
••1 Full Size STARTINGLINE HVLP Gravity Feed Paint Spray Gun with a 1.3mm
(Finish Coat) Fluid Tip and a 600cc (20 oz.) Metal Cup. This 1.3mm set-up is ideal for the Atomization of Basecoats, Clear Coats, and other Light Viscosity Coatings. Spray Gun Specifications: 30 PSI inlet pressure delivers 10 PSI air cap pressure at 13 CFM air volume.

••1 Full Size STARTINGLINE HVLP Gravity Feed Paint Spray Gun with a 1.8mm (Priming) Fluid Tip and a 600cc (20 oz.) Metal Cup. This 1.8mm set-up is ideal for the Atomization of Primers, Sealers, Thinned Latex/Oil Base, and other Medium to Heavy Viscosity Coatings. Spray Gun Specifications: 30 PSI inlet pressure delivers 10 PSI air cap pressure at 13 CFM air volume.

Also Includes: 1.5mm(Single Stage) fluid tip and needle, Air Regulator with Gauge, Gun Cleaning Brush Set, Gun Maintenance Wrench, Blow-Molded Storage and Carrying Case.
••Spray Gun Rebuild Kits are available ••Includes 1 Year Limited Warranty

Blu-By-U 79Z · 03-21-2010, 11:30:59 PM

Quote:

Originally Posted by RICARDO1969

Well i went with this kit i wanted the blue set but that was $300 bucks and this kit was $128 what ya think?
StartingLine Topcoat & Priming Spray System
Includes 2 Full Size HVLP Spray Guns

••1 - Basecoat, Clearcoat and Topcoat Spray Gun
••1 - Sealing and Priming Spray Gun

This 2 Gun System is perfect for the Handyman, Craftsman, Hobbyist and the Do-It-Yourselfer!

It allows you to Spray the Full Spectrum of Coatings
for any size Project Large or Small.
Kit Contains:
••1 Full Size STARTINGLINE HVLP Gravity Feed Paint Spray Gun with a 1.3mm
(Finish Coat) Fluid Tip and a 600cc (20 oz.) Metal Cup. This 1.3mm set-up is ideal for the Atomization of Basecoats, Clear Coats, and other Light Viscosity Coatings. Spray Gun Specifications: 30 PSI inlet pressure delivers 10 PSI air cap pressure at 13 CFM air volume.

••1 Full Size STARTINGLINE HVLP Gravity Feed Paint Spray Gun with a 1.8mm (Priming) Fluid Tip and a 600cc (20 oz.) Metal Cup. This 1.8mm set-up is ideal for the Atomization of Primers, Sealers, Thinned Latex/Oil Base, and other Medium to Heavy Viscosity Coatings. Spray Gun Specifications: 30 PSI inlet pressure delivers 10 PSI air cap pressure at 13 CFM air volume.

Also Includes: 1.5mm(Single Stage) fluid tip and needle, Air Regulator with Gauge, Gun Cleaning Brush Set, Gun Maintenance Wrench, Blow-Molded Storage and Carrying Case.
••Spray Gun Rebuild Kits are available ••Includes 1 Year Limited Warranty

I bought this kit from Auto Body tool mart a while back for $165. I use the primer one alot. I like it. Sprays great. Only complaint is the POS paint cup. The lid gets cross threaded every time u use it. But overall a great gun -Matt

RICARDO1969 · 03-21-2010, 11:37:51 PM

I wonder if i can get the rubber lids?

Blu-By-U 79Z · 03-22-2010, 12:16:50 AM

I havnt found a way yet because of the "hook" at the top. If that able to be removed it would work with a different cup. Have been thinking about getting the DevilBiss Cups kit where it has the soft cups that you up in a hard plastic up and spray. This way u can spray upside down and never loose feed. Would be a good upgrade i think. -Matt

earlysecond · 03-22-2010, 07:18:36 PM

HF disposable paint cups. . .especially for epoxy primer. Use once and toss. They run .50cent a piece on sale.

I only have one paint cup that I like and it is plastic. It came on a cheap gun from HF and they may sell it alone. It is a female thread so only fits those guns. Screws right on to my Iwata and is easy to get the lid on and off plus easy to clean.

If you have crossthread probs they make cups with lids that merely snap on. . .which is fine until some clutz like me bumps it and spills a liter of clear coat. . .OUCH!

Brent