Got my 1970 Camaro SS.

[Fri]

Step 1 of the audio video saga! While the interior is out again, Im sizing up the audio and video now. I swapped out the 70 dash to put in a 79 dash so I can accommodate a 7inch touchscreen monitor where the middle vents are. The monitor will control, my video controller, cameras and the computer which will give me games, internet, pandora etc and the use of my flash drive for all my music. The cd/dvd player Im mounting in the pocket in the center console below the radio. I thought it would be good to have that option for cd/dvd play. See below. The computer (fit-PC2) a 12 volt application, is being mounted in the glove box. http://www.fit-pc.com/web/fit-pc/fit...pecifications/
Pictures of the install will come later on the computer.....

Picking the dash bezel





7 inch monitor



7 inch monitor breakdown



Sizing it up.







CD/DVD player

[POS71RS]

Uh.... WTF?.. I'll be watching for this...

So, how do you get internet on it?

I figured I'd get a really nice headunit that has some of those functions. Maybe one with the flipout screen. But this looks intense!

[Fri]

Wireless 4G internet card. Havent experimented with it yet but Im sure it wont be 100 percent stable but I dont plan on listening to, to much music on the road when I got that beast under the hood!

[Da-bigguy]

I will be following this thread with interest as I am interested in installing a CarPC in mine as well.

[stafs05]

Originally Posted by SteveHOCP

1.) Dude, thank you for saving the car. Seriously.

2.) While my car was in no way in the shape yours is in, I did replace both rear quarters, tail panel, doors, fenders and hood with all brand new panels and coated the car with POR 15 rsut prevention on the shell AND the new panels. Here is a 7 minute video of the process:

http://www.youtube.com/watch?v=VMiXpNl0ods

3.) A video of the big block that went into the car (ate a cam, had to come back out and then back in). Seeing the cam after the lobes were ground down to nothing is worth the 5 minutes it takes to watch the clip.

http://www.youtube.com/watch?v=3VGl8x6QYCY

For me, a "few rust bubbles" turned into a complete restoration, that took the best part of 6 months to get done. When all was said and done, every penny was worth it. So don't get discouraged!

The thread on the build process is here:

http://www.nastyz28.com/forum/showthread.php?t=112797

I hope it helps with your Camaro.

Thank you for showing your Camaro

[Fri]

This is how my camaro is going with the rear. Just like my model.

[Fri]

Played with the monitor and dash trim a little bit today. Going to home depot to get some ideas for a trim to go around the monitor. Couldnt get a perfect cuts because of the precut holes for the vents and cig lighter.



















Here's a picture front and back of the mini computer.

http://www.fit-pc.com/web/fit-pc/fit...pecifications/