|
06-14-2012, 04:21:39 PM
|
#136
|
|
New Member
Join Date: May 2010
Location: Mtn Home AFB, Idaho
Posts: 20
|
Quote:
|
Originally Posted by 10-4onthe79
Well apparently my lug nuts are not correct for my wheels. I never
noticed this as apparently the axle flange held the wheel centered.
When I got home I checked one of the lug nuts in the wheel and I
have as much play in the hole as I have slop in the wheel, so I have
the correct lug nuts ordered and will keep fingers crossed...
Thanks for the help, I'll post how it turns out
|
that type of lug nut is common for aftermarket mags, if you ar running centerlines, it is possible you need the short shank version (~.5 inch long) as the width of the wheel where the stud goes through is less than others.
something like these http://www.ebay.com/itm/10-LUG-NUTS-...sories&vxp=mtr |
|
|
|
01-26-2013, 11:38:42 AM
|
#137
|
|
Veteran Member
Join Date: Feb 2000
Location: Montgomery IL
Posts: 1,052
|
Anyone have updated PN's on the backing plates assemblies or are they discontinued? I see some of the individual parts are still available but am looking for the assembly.
__________________
71 Formula, 455 with ported 96 heads, Crower solid lifter cam, HSD/800DP, TKO 600, 3.73 Eaton posi.
|
|
|
|
|
01-26-2013, 07:16:23 PM
|
#138
|
|
Lifetime Gold Member
Join Date: Sep 2009
Location: eden, GA
Posts: 11,013
|
I would go to the local junk yard
|
|
|
|
| Messages from Our Sponsors ! |
|
|
|
Awesome NastyZ28.com Merchandise !!
T-shirts, wearing apparel
Drinkware, Mouse Pads, Decals
|
|
|
01-28-2013, 08:27:21 AM
|
#139
|
|
Member
Join Date: Mar 2012
Location: SC
Posts: 64
|
Quote:
|
Originally Posted by Zee
Anyone have updated PN's on the backing plates assemblies or are they discontinued? I see some of the individual parts are still available but am looking for the assembly.
|
Search "s-10 backing plates" on Amazon.com in the automotive section, if you want just the cast backing plates. As for the whole assembly...chk the junkyard.
G |
|
|
|
|
01-28-2013, 09:01:01 AM
|
#140
|
|
Veteran Member
Join Date: Feb 2000
Location: Montgomery IL
Posts: 1,052
|
yeah, I found the backing plates on Rock Auto. Looking for the assemblies they used to sell as a unit.
__________________
71 Formula, 455 with ported 96 heads, Crower solid lifter cam, HSD/800DP, TKO 600, 3.73 Eaton posi.
|
|
|
|
| Thread Tools |
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
