THANKS, I'm really happy how it came out.
My original suspension parts had 125 to 300K miles on it, so when I overhauled it
I have the Hotchkis TVS (The whole kit & kaboodle: Springs, shocks, swaybars, Front A Arms, steering). CPP Disk brakes all around
It has 8,000 + miles since being finished in May 2011.
Also in setting up the front end alignment there are no shims, it fit that well.
Check out other suspensions & see how many shims they need.
The car is low though, minor scraping every once in a while.
But it handles like a dream, and at high speed the front end does not get light like it use to.
The only thing I don't like it it has 12 to 20 grease fittings besides the regular front suspension ones) ( & you need to put synthetic grease on it & it is sticky and gets everywhere

)
I have read suggestions about putting Teflon tape before you bars before you put the bushing on and if you can I would. I didn't and occasionally get a strange noise, but I'm not worried about it.
I have 265/50x15 they are just a hair too wide & they do rub just a little on the front sway if I turn all the way.
I did a short autocross (22 seconds) & it handled great and was very predictable.