Originally Posted by Twisted_Metal
Clean the contacts on the bulb holders with a tiny file.
The ones inside the holder and the contacts which touch the printed circuit panel.
I test the LEDs in the cluster with a 12V trickle charger before I install the cluster in the dash. It makes this job easier.
Try an eraser for a “typewriter” (white- slightly aggressive eraser) as it might be a little easier to clean up- This is how we were taught to clean PC board fingers (gold contacts) in Tech School.
Mark (A.K.A. Z28 Mark)
Camaros Limited~Nor Cal
1973 Camaro Z/28
2001 Camaro Z/28
Last edited by Z28 Mark : 04-14-2012 at 11:58:20 PM.