|
Here is my 2 cents. In 2003 or 4 I put a big block in my car and bought a set of Flow tech headers. I didnt drive the car much, I put about 100 miles on it and lost oil pressure. So I blew the motor. Fast forward bout 8 years. I started takin the car apart to redo it at the end of 2011. so when I toke the headers out they were all flaking on the bottoms and i didnt even noticejust looking from the top. I know its more hurtfull to a car if you don't drive it but damn. $500 and I have a pair of headers that look like pooh. Buy a set and paint them with some good paint so you can touch them up if you need to! Has anyone tryed to POR15 a set? Good Luck
|
Threaded Mode