3.42 or 3.73 with 700r4

[wiseryder]

Originally Posted by -=79z28=-

ya know as i sit here and think...maybe he means in overdrive without lockup? but i thought that heated up the fluid way too much. hmmm

Yup, sorry thats what I was saying just not coming out right.
I could go measure my tire now , but car has 275/60/15 on it
And I may be off alittle on my rpm's , not much tho.
If I'm under 60 I don't lock- up the converrtor

[wiseryder]

Originally Posted by RockinZ

There's something wrong there. 1 to 1 ratio (no OD), you should be revving close to 2800 with a 27 inch tire.

never gets that high, less I'm hammering it

[warped]

275/60-15 tire is 28 inches tall.

[RockinZ]

Originally Posted by wiseryder

Yup, sorry thats what I was saying just not coming out right.
I could go measure my tire now , but car has 275/60/15 on it
And I may be off alittle on my rpm's , not much tho.
If I'm under 60 I don't lock- up the converrtor

http://www.csgnetwork.com/multirpmcalc.html

Says 1880 with a 28 in tire, but that would be locked. Sound like you're good, maybe your rpms are a little lower than reality. Like you said, not by much.