Like to hear from central valley owners
 

Any 2nd gen clubs in Fresno area? Restoring a 76 coupe and could use local advise. Need a lot of body work and interior. Drive train was new when I bought it. 350 4bl stock w/turb350.

I am in Hanford, just about 35 miles south of you. I have a '77 currently being worked on.

We're in Dinuba. guess thatmakes us almost neighbors. We've been working on a 72 for 2 1/2 years. Drop us an email if you want.

------------------
Lyn

hi guys im in caruthers and work in lemoore i have a 71 z/28 working on it for 2 years also

Los Banos here, I've got a 70SS & a 73 plane jane.

I'm in Fresno. I have a 70 RS.

Anyone here in central valley ever do rear end work? I have a posi unit and some gears that I want to install and need some guidance and/or assistance.

Thanks

I've done a few. Just a few tips
* Pre crush the crush sleeve before installing (Much smoother)
* Mic washers on both sides, it will give a good starting point.
* I set lash a little tight (but don't kill it), it will loosen up slightly.
Everything else is pretty much basic Mechanics (Almost);)

hey people have some extra parts from a 71 should post this in the swap meet section but you guys are local and a little eaiser to get the stuff to also have lots of good early style cores blocks heads cranks and so forth

I live in Fresno. I have a 71 SS. Interior new, in the process of replacing piston. ;)