I have the car running and have corrected my leaking oil pan. I am ready to have the car "properly" tuned on the dyno to get the most out of it. What kind of price should I expect?

It depends on where you are.
My shop charges $150/hour for dyno tuning and another $40/hour to run a wideband 02 sensor with data logging.
3 hours is generally more than enough time for a street car

------------------
1971 Camaro
383 stroker ~500HP
M21 4spd
12" brakes
16x10" Wheels
Autocross competitive
Sales / Tech - The Speed Merchant, San Jose, CA
1-800-994-0930
mailto:BrettK@speedmerchant.comBrettK@speedmerchant.com</A>
http://www.speedmerchant.com/

Where i live its $75.00 per hour

------------------
1972 Camaro 350 factory heads 1.94/1.5 street driven full interior
93 octane everything works 7.59
89.54 mph
Never owned a trailer never will!

I think average price is gonna run ya between $125-160. Its also $150 where I live as well.

We have a shop that does 3 runs for $75, no data logging. If you have an O2 sensor in the exhaust system then they charge a bit extra.

not to far from me theres one...

3 Pulls with Wideband O2 (Air/Fuel): $60

Hourly Rates: Customer Tuning: $85/hour -or- Shop Tuning: $100/hr

(used to be about $65/75 but they raised there prices)

My local shop has these rates:

Dyno Rates:

$100/hr (Air/Fuel Not Included)

$135 AWD (Air/Fuel Not Included)

$35/hr additional for Air/Fuel
(Tailpipe Sniffer, weld-in bung not needed)

Well I called the shop that built the motor today. They do not have a chassis dyno, only the "motor only" style.
Anyone here in Dallas have a good shop they TRUST ?
I know Wells has a chassis dyno. I may call him and see what he charges.