2 quick questions.

1. what is the easiest way to remove the choke?

2. my front fuel bowl has 2 inlets. I am wanting to use one for a fuel gauge. what fitting do i need to adapt it down to 1/8 npt?

thanks

To answer #1, a big prybar comes to mind:)

Seriously - take the three screws out for the choke cap, then take the three screws that hold the choke housing on. Disconnect the linkage and that's it.

To answer #1, a big prybar comes to mind:)

Seriously - take the three screws out for the choke cap, then take the three screws that hold the choke housing on. Disconnect the linkage and that's it.


i did that, i took the electric choke off, but was wanting to take the flap out of the choke horn. i may just leave it for now, maybe a winter thing. lol

isnt the flap heald in by 2 screws? look underneath. jim

the flap is sandwiched in the bar. Grab the flap with some pliers and carefully pull it up and through, then the bar will slide out the side.