Hi

I wonder what threads there are for the bypass nipples in the water pump and the intake manifold (weiand team G).

Thanks Kristoffer

Hi

I wonder what threads there are for the bypass nipples in the water pump and the intake manifold (weiand team G).

Thanks Kristoffer

If you're refering to bypassing the heatercore by pluging up the fittings on the water pump and intake manifold.

Works fine.

The threads themselves should match a temp sender (like the one in your cylinder head). They are 1/2" plugs.

I bought a couple of these this afternoon to plug my intake and I THINK they are the same size on the water pump (at least the speed shop owner told me they were): http://store.summitracing.com/partdetail.asp?autofilter=1&part=AER%2DFBM3749&N=700+4294924496+4294923391+115&autoview=sku

EDIT: Yes, I checked last night. The water pump and intake used the same 1/2" NPT plugs. I'm running a Milodon pump & Edelbrock RPM intake...

okey, thank you.

1/2" NPT (pipe thread).... not the same as a bolt thread!!