I've swapped the 305 out of my car with a 350. Now im having issues with the power steering pump due to now having headers rather then the manifold. Can anyone give me some place that has this bracket for sell for less then 50. If anyone has experience fabricating the bracket please share. I worried about burning up the pump or throwing belts due to fabricating this bracket. If anyone wants to write a simplistic fabulous fab guide I appreciate it.

PS: It's a long waterpump.

It's a little more than $50 (and worth it), order Part 402L
http://www.alangrovecomponents.com/Power_Steering.htm#small

It's a little more than $50 (and worth it), order Part 402L
http://www.alangrovecomponents.com/Power_Steering.htm#small

I should have the bracket off my 350 this weekend... Could sell it to you if interested (cheap):confused: .

I should have the bracket off my 350 this weekend... Could sell it to you if interested (cheap) .
Send me a private message with some contact info.

Simple bracket I made with 1/8th inch steel I had laying around. Just welded the two pieces together and a nut on the back side and that's it. Plenty of street driving and 6K+ rpm's later, no issues.

http://i8.photobucket.com/albums/a42/mgt999/406/DSC01073.jpg

http://i8.photobucket.com/albums/a42/mgt999/406/DSC01075.jpg

I saw your setup up on the previous topic about this issue. Nice work on the fab job. Are those Dynomax headers? Looks just like the ones I bought.