I don't know if anyone can, but I need to know the specs on the bolt for the fuel pump...

I managed to loose one while putting the new pump on, and the first was such a pain in the a$$ I really don't want to have to take it out....

If you mean the mounting bolts 2 are 3/8"x1' or so, and 2 are 1/4"x3/4". If you mean the fuel pump rod I'm not sure.

I don't know if anyone can, but I need to know the specs on the bolt for the fuel pump...

I managed to loose one while putting the new pump on, and the first was such a pain in the a$$ I really don't want to have to take it out....

It helps if you turn the engine over so the fuel pump cam lobe is on the bottom of the lobe.

I think you mean so that the fuel rod is the farthest up it can go into the block... I am already there.

I think you mean so that the fuel rod is the farthest up it can go into the block... I am already there.


yes, that's right. It should go on without a problem then. It took me a few tries when I did mine. but when I rotated the cam in the right place it went on like pie. I also put some grease on the fuel pump rod to keep it from sliding down, that was the biggest PITA for me. Made me want to just say f it and go electric ;)

That all went easy... I'm having a damn problem getting the thing back on... bahhh.