Could somebody calculate HP & TQ for this combo?
350 Chevy smallblock

Bore: 4.040
Stroke: 3.48
Heads: Edelbrock Performer RPM (170cc intake runner & 64cc combustion chamber)
Compression: 9.6 (?)
Cam: Comp Cams Magnum 268H (.454 lift & 218 duration @ .050 for intake & exhaust)
Rocker arms: Roller tip (1.52)
Intake: Performer RPM
Exhaust: 1 5/8" long tube headers into 2 1/2" duals with H-pipe
Carb: 750cfm Q-Jet

Thanks, in advance for your help.

[This message has been edited by jeff81 (edited June 30, 2005).]

ttt

ok
this is my 1st time using a desktop dyno so this may be WAY off or close...or even right

i just don't know.

my figures are showing:

497 HP @ 6,000
488 ft lbs. @ 4,500
at the fly of course

if i'm right, congratz
haha

if not, i pray i'll learn to run this thing correctly one day

------------------
Click here, it'll explain it all (http://img.photobucket.com/albums/v628/luda79/sig.jpg)

<font face="Arial,Verdana" size="2">Originally posted by luda:
ok
this is my 1st time using a desktop dyno so this may be WAY off or close...or even right

i just don't know.

my figures are showing:

497 HP @ 6,000
488 ft lbs. @ 4,500
at the fly of course

if i'm right, congratz
haha

if not, i pray i'll learn to run this thing correctly one day

</font>

Those numbers are out to lunch high.

Just by ear that looks like its about 350HP at the flywheel. Maybe a bit more, but just my .02.

good luck,
steve

Thanks luda, but there's no way. I was expecting 360 to 370 HP.

Anyone else?

can someone run mine too?

Bore: 4.030
Stroke: 3.48
Heads: GM Vortecs (170cc intake runner & 64cc combustion chamber)
Compression: 9.6 (?)
Cam: Comp Cams XE262H-11 4X4 Cam (.462/.480 gross lift, 262/270 Advertised, 218/226 @ .050)
Rocker arms: Hydraulic Flat Tapplet
Intake: Performer (Dual Plane)
Exhaust: 1 5/8" long tube headers into 2 1/2" duals (no cats)
Carb: 750cfm Q-Jet

it's looking about:
319 hp @ 6,000
295 ft lbs. @ 5,000
------------------
Click here, it'll explain it all (http://img.photobucket.com/albums/v628/luda79/sig.jpg)

[This message has been edited by luda (edited June 30, 2005).]

hahaha
sorry guys, i've lots to learn about this program =\

------------------
Click here, it'll explain it all (http://img.photobucket.com/albums/v628/luda79/sig.jpg)

buuuump

------------------
Click here, it'll explain it all (http://img.photobucket.com/albums/v628/luda79/sig.jpg)

I don't have Desktop Dyno, but both of you guys look to be 350-380 HP at the flywheel.