can any one tell me what motor mount holes to use when switching motors in a 1981 camaro from a v6 to a 305 v8 and can i use the old v6 mounts?

I did this swap, 15 years ago....
I pulled the motor/tranny from a V8 Camaro and installing them in a V6 body.

There is another set of holes the motor mounts need to bolt to in the V6 frame, they should be there already.

I no longer remember if I used the V6 or V8 mounts. :(

Yeah, THIS was helpful. :confused:
Sorry, it's been too long.