Ok I put my summit exhaust on today and it does sound pretty nice to me but my only problem is hanging it up. How do you guys hang the system? Did you use the things that came in the kit? I could find any way to hang them on my car. I used some hangers that were on my car. My drive side fit nice. It fits pretty good but I had trouble with the tail pipe hitting the leaf spring. The real problem is the pass side. Its hangs about 1" lower than the drivers side and appear to be further from the driveshaft then the drivers side. What shoul I do to fix it? Also are the tail pipes supposed to be just barely be visible? they just turndown right next to the leaf spring shackle and from a side view you can barely see it. Are they supposed to be turndown style?

that is the way mine turn down, you can barely see them.as for hangers i just drilled new holes in the floor board and used the brackets in the kit, i modified the brackets by twisting them in the vice.

I also drilled holes in the floorboard, right behind the front seats, on the lower part of the driveshaft tunnel.

thanks. I like how it sounds but it hangs kinda low. I ended up lowering the drivers side to match the passenger side. I was hoping the exhaust would be closer to the middle and tuck behind the floor boards but it didnt. Sounds good though and being way cheaper than flowmasters Im happy.

Sorry to keep this thread going but I got one last question. I notice where the tailpipes go over the axel I only have 2" clearance with my air shocks totaly deflated. Did you have that amount of clearance as well on yours and does the axel ever hit the exhaust on big bumps?

i have air shocks on mine and have no trouble with it, but mine are aired up a little.