what are the torque specs on Eagle SIR i beam rods for my sbc? they are ARP, and i cant find the sheet.

what are the torque specs on Eagle SIR i beam rods for my sbc? they are ARP, and i cant find the sheet.

Before you put them in an engine diassemble them and retorque and check the size of the big end as we have sen to sets that have come through the shoop that we retorqued they went out of round up to .003

If they are SBC rods I not sure but I think they were torqued at 42 pounds.

i just found out that they are 50ft. they are already in and assmbled.

Like said above make sure you have the rods resized when you change the bolts. Believe it or not it changes the rod clearences drasticly.

they are the original arp bolts that came in the eagle rods. they are only about 1 years old. i just lost the spec sheet, but i just found it and they are 50 ft/lbs