I've Googled around as well as searched Autozone.com, Kragen.com, Pepboys.com, McMaster Carr.com and can't find anywhere to purchase a 1/8 Female X 1/8 Female, X 1/8 Male NPT tee so I can install a mechanical oil gauge and still keep the sensor.
The posts in the archives say to "install a tee". Ok, so where can I find one? :confused:

I've Googled around as well as searched Autozone.com, Kragen.com, Pepboys.com, McMaster Carr.com and can't find anywhere to purchase a 1/8 Female X 1/8 Female, X 1/8 Male NPT tee so I can install a mechanical oil gauge and still keep the sensor.
The posts in the archives say to "install a tee". Ok, so where can I find one? :confused:

Try a hardware store.

Hardware store like ace, home depot, lowes, true value, etc.. You won't find what you listed.. But you can get an all female T then get nipples to screw into the T to make it male on one end..

Here's what I bought at a local Ace hardware store for under $4 to put my oil temp and elec oil pressure gauge in with. http://rides.webshots.com/photo/2506229080041290424mqQOJD
http://rides.webshots.com/photo/2700566510041290424yZeGJj

A nipple, a 90* elbow, another nipple, a female T.

I've Googled around as well as searched Autozone.com, Kragen.com, Pepboys.com, McMaster Carr.com ...

About all I can say is if it's not listed in the McMaster-Carr catalog,,, it doesn't exist!

Like said, your going to find enough pieces at the local hardware store to make up what you want.

I got mine from Home Depot, no less.

I have a spare one exactly like you want if you cant find one.