If anyone out here has rhoads lifters could you tell me if the clicking ever stops. I have them and they click even at 3200 rpm. Maybe I have them adjusted wrong.

nate

I adjusted mine down until it wouldn't run right. Short answer- no.

good lifters ,i had them and removed them .could not stand the noise anymore.

I went through the same thing. I lived with them.

Mine don't click at 3K, or at least I cant hear them. Rhodes are very sensitive as to how you set the lash. If you don't have the instructions, shoot me a pm and I'll send them to you.

The instructions said to adjust hem with the intake off. My intake is on and the car is running. When I did adjust them I set them just like a regular lifter.

Nate

http://www.amotion.com/tech/caminst.html
This company says 1 full turn after chatter stops, when setting the lifters running. I only did 1/4 turn.

Nate - here is a link to Rhoads install website;

http://www.rhoadslifters.com/Pages/Installation.html

You can adjust them with the intake on, the procedure is a bit different. Hope this helps you.

thanks, I am going to try it right now.

Nate