07-09-2005, 07:42:00 PM
I am reinstalling the dash cluster in a 1970 camaro. I can not locate the two wire plug for the amp gage. wiring has been monkeyed with before I got in there. my diagram does not even show the gage option. Anyone know where these two wires come from. Thanks for any help
07-10-2005, 11:25:00 PM
I did an idiot light to gauge conversion on my 1970 RS/SS a few years ago. It took me forever to find the 100% correct cluster w/correct spedo and tach with correct redline. When I did the conversion, I purchased a 1970 dash w/gauges harness. I'm struggling to remember but I think the connector came from the bulkhead connector of the gauge harness (where it mounts under the dash near the firewall). I also purchased a Front Light harness to get the amp gauge wiring but I think I later found out that I didn't have to purchase this. I'll have to double check everything tomorrow evening, that's if you don't find out before then.
07-11-2005, 05:42:00 PM
I think you hit the nail on the head in my case. Any help from anyone would be great.Ed
07-11-2005, 08:25:00 PM
Well... The connector is part of the gauge harness and it comes off of the harness at the gauge end. I still don't remember about the Front Light harness but I think you did need to purchase this also. It's easy to change but pricing if bought new (~$140). I know all of the books mention a unique difference between Front Light harnesses for idiot lights and guages. They must know what they're talking about. I hope this helps a little.