I cant find jack!! any know where it is?
Thanks

Above the oil filter on the L/H side of the block

Above the filter is where I put them. Works for me.

you mean that 1/2 inch hole?? Is that where the factory put them??

Or the driver's side front just above the pan rail. (on the side)

------------------
Custom Auto, your source for quality machine work, cores and new parts at competetive pricing right here in British Columbia 1-888-563-4050
A Canadian, EH? (with a 10 second street car)

<font face="Arial,Verdana" size="2">Originally posted by rustbucket79:
Or the driver's side front just above the pan rail. (on the side)

</font>

Yep, that's where I've got my electric oil pressure gauge sender. There's a hex key plig there that didn't look like a plug to me, but it was.

GP

<font face="Arial,Verdana" size="2">Originally posted by rustbucket79:
Or the driver's side front just above the pan rail. (on the side)

</font>

Is that the spot you reccomend Rustbucket??
Thanks

It really doesn't make a difference, either place will be great.

------------------
Custom Auto, your source for quality machine work, cores and new parts at competetive pricing right here in British Columbia 1-888-563-4050
A Canadian, EH? (with a 10 second street car)

I 'heard' that the front is the better of the 2 since oil has already gone thru the system and willl give you a more real pressure reading....it'll be a little lower than the other spot above the filter, but if you actually have -0- pressure then its the real deal, not just a bypass messup or something....