i installed my new cam comps 268h the car starts up ideals fine rev it up to 2500 rpms and its fine but after that it starts to missits pupping out the carb could it be my wires are messed up or am or is the timing off i do not have a timing light to check it right now what do you guys think thanks for any info

sounds like timing if it is idling good,try turning dist. till it smooths out.

another volt for timing. Turn the dist up (push vac can toward carb)

If that dont fix it 100%, you may have to re time it from the start. (get #1 piston up, re install dist, etc)



[This message has been edited by night rider (edited January 19, 2005).]