http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=43946&item=7944375117&rd=1

Will this fit an Edelbrock 750 with electric choke or not?

If it won't, can someone give me ideas of what will? I'm looking for something smooth, no logos, and preferably aluminum or black, not chrome.

That doesnt look like a drop base aircleaner so it should fit with no problems. I have the billit specialities air cleaner that is the same style and it fir both my edelbrock and holley dp carbs.

It does drop 1.25 in, that's why I was worried.

Specter sells air cleaner spacers/adaptors so if it did hit anything you could just use the thinnest one. I bought a set for around $10 at Kragens and they worked good.

I would see if the seller can get you pics of the underside of the airfliter pan.

Personally, I would dump the Edelbrock carb and go back to either a Quadrajet or a Holley double pumper. If you keep the Edelbrock, you need something that will put enough space between the bottom of the air filter base and the top of the carb because of the accelerator pump. They stick up off the top of the carb and it will hit a standard drop base air cleaner base. I used a 1" plastic air cleaner spacer and cut it to size. I am using a standard drop base air cleaner on a Quadrajet. You will need a cowl induction hood if you go too wild with manifold selection on that big block. A flat hood just won't clear much.