Hello everyone my name is Randy,I have been lurking on the site for about a month now enjoying the wealth of knowledge on here.I bought a 76 lt about 3 months ago, this weekend i finally got my new motor in:D 383 with a 177 weind blower. Thw motor runs great it was built by Beal Racing engine in Thomasville.I am extremly happy with it but that brings me to my problem.I called today to set up an appt to get the exhaust put on.Well much to my suprise he said no true duals:mad: ,said headers into 1 cat then could split into 2 pipes.What can i do, does anyone know of any local shops that will run them for me.The motor dynoed at 517.3 rwhp @ 5900 and 562.9 at 4000 with open headers.If i choke this down into 1 cat even a high flow i am afraid it will kill it.The builder said with the blower i needed alot of exhaust.Any way sorry for the long post but i am stumped.Thanks in advance for your help..

Also if any one can tell me how to post pics i will gladly post some.On the post above i went to attach files down below and put a pic there.It uploaded it but it didnt show up on the screen.You can see a pic under my profile i think i did that one right:screwup:

Tell him it will be a drag car and no need to worry about being legal. Just do what I pay you for, lol.
Check with:
Scott's Muffler
1345 Reedy Creek Rd.
Lexington, NC. 27295
Phone: (336)731-4253

They do EXCELLENT work. I called the other day and got a price. 2 1/2" Aluminized pipe, an "H" pipe, 40 series Flow's and turn downs was $340, installed. Same setup in S/S pipe was $700. I know a ton of hot rod people that have used them and will keep using them.

Can't wait to see pictures. Good luck.

p.s. If all else fails. I have a complete 2 1/2" exhaust collecters, "H" pipe, 40 series Flow's and full tail pipes, I'll sell you for $150. It sounds bad as hell. The only reason I'm not putting it back under my car is cause of the tail pipes. I don't want them, but I don't want to cut them off a good system.

John thanks alot for the info. I will give them a call and i think i will use the dragcar line.If this doesnt work i would be interested in your system.I really wanted to dump it at the rear axle but beggers cant be chosers.Thanks again will let you know what happens.

I called this morning and they said no problem..I have an appt next Thursday the 31 at 8am:D ..Now if anyone wants to give me some tips on posting the pics i will. thanks again John

p.s. If all else fails. I have a complete 2 1/2" exhaust collecters, "H" pipe, 40 series Flow's and full tail pipes, I'll sell you for $150. It sounds bad as hell. The only reason I'm not putting it back under my car is cause of the tail pipes. I don't want them, but I don't want to cut them off a good system.


full exhaust for $150....is it good condition?

full exhaust for $150....is it good condition?

Yeah, it's in great shape. I'll post a picture of it here in a little bit.

To post pics: Get a free hosting site(I use http://beta.propichosting.com/) Put it one there and then copy and paste the link into "insert image" box above.

Here's a pic. It's all welded together. No leaks. The front is off set for use with Flowtech Afterburner headers.
http://www2.propichosting.com/Images/450015414/11.JPG

Let's try this!

#1 Camaro as I found it for sale.

http://www.nastyz28.com/forum/attachment.php?attachmentid=1902&stc=1&d=1156372522

#2 New motor for Camaro.

http://www.nastyz28.com/forum/attachment.php?attachmentid=1903&stc=1&d=1156373147

#3 & 4 Pictures of the motor in the car as of this Sunday afternoon.

http://www.nastyz28.com/forum/attachment.php?attachmentid=1904&stc=1&d=1156373265

http://www.nastyz28.com/forum/attachment.php?attachmentid=1905&stc=1&d=1156373674

If I have this pic thing mastered, I will walk down to garage and make more pix.

:bowtie:

Why nor order an exhaust system from summit?

Yeah, it's in great shape. I'll post a picture of it here in a little bit.



hmmmm.....probably bolt right in with my car just have to get some hangers....

Well? How does the car sound? Did you go with the Flows or the Spin Techs?

Sorry so slow in posting i have been out of town.I went with 3" and 1 chambers and it sounds awesome but it definatly on the loud side.They are dumped at the rear axle so atleast i cant hear that damn holley fuel pump anymore:screwup:. Thanks for pointing me in the right direction Scott does great work!

http://www2.propichosting.com/Images/450017022/1.JPG This is pic of motor installed in the car about 3 weeks ago.One of you guys let me know if it shows.

ohh yea...looking good!