05-08-2006, 09:38:31 AM
I'm wiring my car back up with a new harness. Problem is, I need some of the old style pins because I chose to use the old connectors whreer I counld in the interior. I just repined most of them. It worked out great because I am able to use there old factory connector hold downs. I'm going along and ran out of pins. the last harness I am using from the factory is the steering column connecctor for the directonal signal switch. Does anyone know where to get the old style brass ternimal ends? I only need 4! thats the worst part. This is for a 81 camaro, but they all used the same connector style for a long time. Thanks. I'll take all suggestions on that. Non of the part stores have anything like that.
05-10-2006, 12:29:38 PM
someone has to have an idea where to find these. I can't be the first to repin a connector. Please help
05-10-2006, 02:01:56 PM
I just rewired my car and have those pins from my old harness lying around....thing is they are still attached to the old wires. If you are not able to find the pins you need, I can send you what I have. All you have to do is join the wires, solder the connection and shrink wrap it. Let me know.
05-11-2006, 05:01:36 AM
How about a bigger pic. Here are some original terminals, http://fmsiinc.com/terminals.htm
05-11-2006, 10:44:03 AM
well, this mornign, after checking every place under the sun, or so I thouhgt, I found them at a camaro specialties store about 25 miles from me. I was looking for a carpet there, and the guy had one laying on the counter. I asked him about it, and he said he just got 400 in. That blew my mind. So I quickly bought a ton of them, and went on. I'm good now. If anyone else needs them, let me knwo. I have the stock pile now!! wahoo!
05-11-2006, 07:44:45 PM
i got some at Kragen, but they came in a variety GM pack...