1980 Camaro Berlinetta
10-31-2003, 02:16:00 PM
How the hell do you get the rear seats out? I sat out in the back seat of my Berlinetta trying to get them out and I have no clue how the come out? Help pleas!!!!! http://www.nastyz28.com/ubb/confused.gif
------------------
1980 Camaro Berlinetta 175X
UNDER CONSTRUCTION
Injection Is Nice,But...I'D RATHER BE BLOWN!
Time to Beat 14.27@98.12mph
Teachauto
10-31-2003, 02:28:00 PM
If I remember right, you push straight down in the front and at the same time push the cushion in (towards the trunk).
Eric
10-31-2003, 02:38:00 PM
#1: Don't sit on the seat if you want to take it out.
As autoteach indicated- you need to push down on the front edge (we're talking about the lower seat cushion- not the backrest) and push the whole seat cushion back toward the trunk. If you pull up on it a bit you should be able to feel the support bar that hooks into the floor clip to get an idea of what needs to be done.
For the seat back to come out- the bottoms have to be out and then you will see the bolts that hold the bottom of the seatback in/down and it'll be pretty obvious what has to be done to remove it.
Talos
10-31-2003, 02:41:00 PM
yup the butt part u just push down and back (towards the rear of the car) kinda like a child proof cap :P lol
then that will reveal the bolts that will help ya get the backing off.
[This message has been edited by Talos (edited October 31, 2003).]
BurningLime71307
10-31-2003, 02:46:00 PM
What I did is sat in the middle on the hump and pulled the front of the cusion in the direction of the trunk.
75 400 4 Speed
10-31-2003, 04:58:00 PM
Feel for the bottom metal frame rod in the seat at the carpet level in front of the seat. Push it toward the rear of the car and at the same time push down on the top front edge of the seat. There is a cross bar in the seat frame that has to clear a rearward facing hook to release the seat. You will know when it is unhooked. Remove the seat bottoms. The back support is bolted to the body on the bottom on each side. Remove the bolts and lift the back straight up off the hooks. Viola! You are done.
------------------
69 SS 350 4 Speed World Wide Camaro Association (http://65.18.159.167/photopost/showphoto.php?photo=58)
75 400 4 Speed World Wide Camaro Association (http://65.18.159.167/photopost/showphoto.php?photo=59)
93 Z28 6 Speed
1980 Camaro Berlinetta
11-01-2003, 01:30:00 AM
Got it!!! And Found my Build Sheet!!!!! http://www.nastyz28.com/ubb/smile.gif
------------------
1980 Camaro Berlinetta 175X
UNDER CONSTRUCTION
Injection Is Nice,But...I'D RATHER BE BLOWN!
Time to Beat 14.27@98.12mph
BurningLime71307
11-01-2003, 10:37:00 AM
Thats always an exiting thing.Good luck with your car.