so i now have the 79 Z28 model and i wanna try and make it as close to my car as i can but heres the problem...i don't have the fender vents or front spoiler on my car...is there any way to remove these from the model? come on you guys must be creative...i was thinking maybe just exacto knife the front spoiler off, agreed? but what about the vents?

TTT

Not being a smartass, but try a pre-mixed tube of body filler, i know you don't need but the smallest amount. Or try any hobby shop, i'll bet they have something.



[This message has been edited by chevyJeff1 (edited October 08, 2005).]

i have the same kit, still in the box.
I would like to change mine to a 78Z.

Hi 79,
That's a pretty easy fix, to remove the side fender vents first sand them off with a rough grit wet/dry sandpaper (the black kind in the body supply area of the auto parts store) around 100 or 12o grit is good for this. Once the raised areas are level with the main fender area there will probably be indents for the vents, these can be filled with any putty that is compatible with plastic. The red Bondo spot putty works good for this. When it is dry sand it smooth. You will probably need a couple of trys to get it nice and smooth, and use a finer grit - 250 to 300 for the final sanding. Then primer it with gray spray primer and you will be able to see how smooth you have it. it may take a couple of trys, but you can always add more putty and sand until you are satisfied.
To remove the front spoiler a razor saw is the best tool. these are made by X-Acto and have a red handle and a fine tooth saw blade. You can get one at the local hobby store or craft store like Michaels, they are only about $3 or $4 and are a worthwile investment for making straight cuts in plastic.
Let me know if you have any other questions.
Dave

sweet!!! thanks i had given up on responces...thanks alot man im gonna start that model soon now!