All,
I have heard of such places that can get you a copy of your original build sheet when you supply them with your vin #. Can anyone help me here with any info on how to get a copy of my camaro's build sheet. If needed my
vin # is 124870N555045. Any help is greatly appreciated.

Thank You,
Jeff Battaglia

I wish I could find that place too.....

I don't know about US but if car was built or sold in Canada GM Oshawa can provide info for a fee. have it for mine.good luck.

I think it was someone one the BB that had copies of some of the Buildsheets from 1970. Not all but some.

Bob R

The only place you can find a build sheet for a car made in the US, is in the car. There is no other source. The build sheet was generated at the assembly plant. There is no way to replicate them after the fact.

Sorry, but those rumors persist but are untrue. If it not in the car or with the paperwork, you are SOL.

------------------
Mike

2002 Trans AM WS6 build #3124 - Pewter
2001 GMC Ext Cab SLT Z71 - Green

<font face="Arial,Verdana" size="2">Originally posted by sharky:
I don't know about US but if car was built or sold in Canada GM Oshawa can provide info for a fee. have it for mine.good luck.</font>

Your statement is abosolutely correct.

Bob R

Okay I figured it out. It was Jody Prather who has Build Sheets from 1970 and 1972 Norwood made Camaro's. Here is the link to some information. http://www.nastyz28.com/buildsh.html

Here is Jody's email address jbprather@fuse.net

Hope this helps someone out,

Bob R

Sharkey, did the Oshawa info include rim type, trim, etc?

GM Media Archive has access to build sheet information from 1977 to 2003.

GM Media Research
gmma.research@gm.com

I emailed them to see if I could get information on my used 1992 Silverado pickup. The option label is mutilated, no paerwork came with the truck and the original selling dealer has already trashed the records or so they tell me.

It took about a week but I got a reply Friday from this lady who said the GM Archives were shutting down June 30 to July 14 (all of GM is shutdown, annual event) and she would search for the original invoice and let me know then. Apparently the only thing they can look up is the invoice but she did not say she could produce it, just that she would have an answer of if she could.

------------------
Mike

2002 Trans AM WS6 build #3124 - Pewter
2001 GMC Ext Cab SLT Z71 - Green

[This message has been edited by WS6 (edited June 29, 2003).]

you might be able to find your original buildsheet in the car. i found my original one from the van nuys factory behind my backseat in the car.let me know if u have any questions on how or where.

I had a short, but convincing discussion with a GM exec (who asked for anonymity) at Carlisle regarding the current Chevrolet archives project.

<font face="Arial,Verdana" size="2">Originally posted by ChrisS:
I had a short, but convincing discussion with a GM exec (who asked for anonymity) at Carlisle regarding the current Chevrolet archives project.</font>

OK...I'll bite. What is the current Chevrolet archives project?

http://www.yenko.net/ubbthreads/showflat.php?Cat=&Board=copous&Number=25145&page=0&view=collapsed&sb=5&o=&fpart=5&vc=1

[This message has been edited by WS6 (edited July 03, 2003).]

<font face="Arial,Verdana" size="2">Originally posted by WS6:
http://www.yenko.net/ubbthreads/showflat.php?Cat=&Boa rd=copous&Number=25145&page=0&view=collapsed&sb=5&o=&fpart=5&vc=1 (http://www.yenko.net/ubbthreads/showflat.php?Cat=&Board=copous&Number=25145&page=0&view=collapsed&sb=5&o=&fpart=5&vc=1)

[This message has been edited by WS6 (edited July 03, 2003).]</font>

Thanks for posting that link...all I got to say is WOW! http://www.nastyz28.com/ubb/eek.gif

best place to look is under the gas tank I look at all cars that go past here. 8 out of 10 are there have found 2 in one car good luck

Hi everyone, I have found my build sheets from my 1970 RS, built the 3rd week of June 70 Van Nuys California between the gas tank and trunk (not in the best of shape), one under the carpet on the passenger side (good shape) and one under the drivers side (all but gone). Between the two, I reproduced mine. I'm still missing some of the info so if you have one from the same month-year built in Van Nuys, I would like you to send an e-mail to me of a copy of it. I would do the same if some asked for it! I'm trying to do a Concourse restore on this car, so a complete build sheet would only be the best.... Thanks (check out my site to see my 70 RS ner perfect restore..... JD :-)

------------------


[This message has been edited by j22long (edited August 05, 2003).]

Here is a copy of mine. Its from 5/26/70, Van Nuys. I can email a copy if you need to resize it. Good luck!!!

http://image.inkfrog.com/pix/trymyss/buildsheet2.jpg

[This message has been edited by TrymySS (edited August 06, 2003).]