1980 Camaro Berlinetta
11-02-2003, 11:26:00 PM
What kind of things need to be done do this? I have a friend needing some info.Any help is appriciated!!!
1980 Camaro Berlinetta 175X
Injection Is Nice,But...I'D RATHER BE BLOWN!
Time to Beat email@example.com
11-03-2003, 12:52:00 PM
drive shaft lenth, trans cross member, speedo cable length (maybe), shifter (to get the 4th gear).
11-03-2003, 02:27:00 PM
i also used bowtie overdrives for my swap and you can get everything you need from them for the conversion to work. Just have to get your driveshaft shortened.The directions for correct measurement for that are also included in the instructions.
11-03-2003, 07:53:00 PM
will the tunnel be big enough for the 700?
11-03-2003, 08:31:00 PM
<font face="Arial,Verdana" size="2">Originally posted by gofastaj:
will the tunnel be big enough for the 700?</font>
Also, I used my original X-Member from the 350 - I just set it back a bolt hole. I havent done it yet - but I jut need to add an extention to the square tubing that it bolts to.