What additional hardware do I need swap this pump

http://cid-dcdd1e609f0a88b1.skydrive.live.com/self.aspx/Camaro%20Bodywork/DSCN2325.JPG

with this one

http://cid-dcdd1e609f0a88b1.skydrive.live.com/self.aspx/Camaro%20Bodywork/DSCN2325.JPG#resId/DCDD1E609F0A88B1!209


Thanks

The images were not included. Here are the links:

http://cid-dcdd1e609f0a88b1.skydrive.live.com/self.aspx/Camaro%20Bodywork/DSCN2325.JPG#resId/DCDD1E609F0A88B1!207

http://cid-dcdd1e609f0a88b1.skydrive.live.com/self.aspx/Camaro%20Bodywork/DSCN2325.JPG#resId/DCDD1E609F0A88B1!209

Looks like the same pump, just different mounting brackets.

In 1980 or 81 they switched metric.... so if one of them is older and the othere is newer, then you would need a high pressure line made or modify your existing line.

Any suggestions on how the newer one will mount with the cradle bracket? It looks like a bolt goes through the top of the it but wouldn't it have to pass through something else to secure it? Maybe I just need to find a pic of a stock 80s setup.

I never considered the line connectors might be different.

I found a pic that has a similar bracket that mounts to the bottom of the water pump. I'll take a look this evening.

They should mount the same.... I've taken one off a 92 camaro and put it into a 80 1/2 ton. Just had to modify the high pressure line.