View Full Version : Found Another Hidden Vin!!!!!
a550550 02-22-2009, 02:18:23 PM I have one beside the heater motor hole. As I was cleaning, I found another directly below the heater box flange, and directly above the passenger side frame mount, between the first and second hole (from the pass side)-reading from the engine side
tried to take a pic, but it wouldn't show up, but the indentations are visible from the inside also. It is upside down.
Thought this might help someone.
vfitom2aol.com 02-25-2009, 09:25:04 AM Would like to see pics to see the location.........I'm a little confused as to exactly where you mean.......
Twisted_Metal 02-25-2009, 11:32:19 AM Interesting find!
Norwood or LA car?
-=79z28=- 02-25-2009, 03:02:27 PM Would like to see pics to see the location.........I'm a little confused as to exactly where you mean.......
i thought this was common knowledge...guess not. LOL
in response to your question, take the A/C (or heater) box out from the car and look below the blower motor hole, its right there...
http://i266.photobucket.com/albums/ii243/pilotmustang2003/vinhide.jpg
Elpres 02-25-2009, 03:20:09 PM are there eny other known locations for VINs? (except for the one we all know)
Twisted_Metal 02-25-2009, 03:47:42 PM i thought this was common knowledge...guess not. LOL
in response to your question, take the A/C (or heater) box out from the car and look below the blower motor hole, its right there...
I think he is saying he found more of them besides the one by the blower motor hole.
-=79z28=- 02-25-2009, 03:53:04 PM oops i read it again. ill go look at mine and see if i can see one.
TheFastForester 02-25-2009, 04:20:40 PM Hey Travis (79 z28) I sent you a pm a couple days ago, have you checked them lately? Thanks.
-=79z28=- 02-25-2009, 04:39:48 PM ok mine doesnt have one there....
but while i was using a wire brush cup on theside grinder to take some paint off, it got caught on a piece of the subframe mount and flew out of my hand, it brushed across my left index finger and now its numb.
...i shoulda held on tighter :rolleyes:
BonzoHansen 02-25-2009, 06:42:56 PM Mine has 2 in those locations.
Budz 02-25-2009, 07:31:08 PM My '71 has two on the firewall, one vertically on the pass side of the heater box opening.....
http://pic20.picturetrail.com/VOL18/594411/1626259/310693173.jpg
And one upside down under the blower motor hole...
http://pic20.picturetrail.com/VOL18/594411/1626259/310693273.jpg
vfitom2aol.com 02-27-2009, 01:38:40 AM That's a nice stamping....
GREGS396 02-27-2009, 05:11:29 PM My 72 SS also has 2 in that same area.
prestodixo 03-01-2009, 10:09:17 PM My '71 has two on the firewall, one vertically on the pass side of the heater box opening.....
http://pic20.picturetrail.com/VOL18/594411/1626259/310693173.jpg
And one upside down under the blower motor hole...
http://pic20.picturetrail.com/VOL18/594411/1626259/310693273.jpg
I see 666 embedded into that car. I'd get rid of it right away, say, maybe to someone in Minnesota were HELL freezes over.:D
Budz 03-02-2009, 07:47:01 AM I see 666 embedded into that car. I'd get rid of it right away, say, maybe to someone in Minnesota were HELL freezes over.:D
http://www.mysmiley.net/imgs/smile/evilgrin/evilgrin0003.gif
78LT383 03-03-2009, 09:30:33 AM Mine doesn't have the stamping near the blower motor hole. It does have the one nearer the duct hole.
|