80 Z28 with 350/Auto--anyone know what the correct torque specs are for new engine mounts. Can't find the data in the service manual nor via the search function (blank screen). Appreciate the help!

Ed

Any real help out there?

I don't think most people put a torque wrench on the motor mount bolts. If you are worried about them put some red loctite on the treads and just turn them good and tight.

Hell, my buddy once drove his blazer around four wheeling for several years with one of his motor mount bolts missing the nut. LOL

I try to torque everything down to spec when I can. This is one area where it's not super critical. Just get them on good and tight.

I checked out Cindy--very very nice!! How can I find your chapter write-ups on Cindy's progress. I'm following in your footsteps and your lessons learned would be truly valuable.

Ed

I checked out Cindy--very very nice!! How can I find your chapter write-ups on Cindy's progress. I'm following in your footsteps and your lessons learned would be truly valuable.

Ed

I guess I'm confused. You just cluck through the pages. If you have any questions, PM me.

~Justin~